We are one of the leading manufacturers and exporters of a comprehensive range of engineering plastic. These are manufactured using quality raw material such as cast nylon, extruded nylon, polyacetal, PTFE, UHMWPE, PP, HDPE, PVC, polyurethane, PEEK and acrylic; that are sourced from reputed vendors. We offer these plastic material in varied forms like rods, pipes, tubes, flexible tubing, plates, sheathing, coil, square, bush, rings, profile, molded, machine parts. In addition, to meet the varied requirements, we are specialized in customizing our product range, confirming to export quality standards.
Our range encompasses the following:
PERFECAST NYLON-6 also called Monomer Cast Nylon-6/ Mono-Cast Nylon-6/ MC Nylon/ Cast Polyamide/ PA-6-G is superior to Extruded Polyamide-6 & PA-66 withBetter mechanical stability
Better mechanical stability
Lower water absorption
Better creep resistance
Better dimensional stability
Higher wear resistance
Very good sliding properties mean that PERFECAST PA-6-G is the classical slider material for highly loaded machine components. Among these are bearing bushes, slider pads, guide pads as well as gears and sprockets. Because of the low coefficient of friction only an initial lubrication is generally needed. Often lubrication can be dispensed with altogether.
High wear resistance at low and medium speeds, in particular under rough conditions (e.g. dust or sand contamination in the bearings) are further characteristics of PERFECAST PA-6-G as a sliding material for bearings. Contrary to conventional bearing materials such as cast iron, steel or bronze a much longer running life can be achieved under rough conditions.
Good damping properties for the reduction of vibration and noise, particularly in the case of wire rope and conveyor rollers are of particular interest. PERFECAST PA-6-G reduces vibration which is transferred from metallic rollers to shafts, bearings and machine frames. In the same way, use of friction bearings of PERFECAST PA-6-G allows reduction of the vibration affecting the machine frame. This way the life of machines and their parts can be extended. Furthermore a contribution is made to lowering machine noise.
Low specific weight of PERFECAST PA-6-G reduces component weight compared to that of metallic materials. This is of particular interest where parts rotate and centrifugal force is generated. This is considerably reduced due to the lower weight, and also reduces the associated unbalances and vibrations. The greatly reduced weight often reduces even the required drive power. Furthermore, handling and assembly of large parts is made much easier.
Good machining, dimensional stability, low residual stress in PERFECAST PA-6-G allows production of complex engineered components and application in all design areas. Machining can be performed with standard tools and conventional machines for wood and metal working. High feed and cutting speeds promote cost-effective production.